C-DT16 single pass 16 เหลี่ยม
  • Air ProC-DT16 single pass 16 เหลี่ยม
  • Air ProC-DT16 single pass 16 เหลี่ยม
  • Air ProC-DT16 single pass 16 เหลี่ยม
  • Air ProC-DT16 single pass 16 เหลี่ยม
  • Air ProC-DT16 single pass 16 เหลี่ยม
  • Air ProC-DT16 single pass 16 เหลี่ยม

C-DT16 single pass 16 เหลี่ยม

คุณสามารถมั่นใจได้ว่าจะซื้อ C-DT16 single pass 16 square จากโรงงานของเราและเราจะเสนอบริการหลังการขายที่ดีที่สุดและจัดส่งให้ทันเวลา

แบบ:C-DT16

??? ?????????

รายละเอียดสินค้า


C-DT16 single pass 16 square electric cabinet and electric box terminal


1.The C-DT16 single pass 16 square electric cabinet terminal is a patented product developed by our company for distribution boxes, distribution cabinets, branch boxes, box transformers, leakage protection switches, drop switches and desktop transformers.The electrical and mechanical performances have obtained the inspection report of the China Electric Power Research Institute and National Quality Supervision and Inspection Center.It has been used on a large scale in the State Grid, China Southern Power Grid and major provinces and cities across the country.

The C-DT16 single pass 16 square electrical cabinet terminal is an invention patented product of Wosign Company, which has obtained structural design. It can automatically lock the wire without crimping, and it is still firmly connected while withstanding high-frequency vibration. The installation procedure is much faster and reliable than the traditional terminals. Not to wind insulating tape and low temperature rise.It is especially suitable for projects with short construction cycle and great construction difficulty, which can play the role of saving time and improving construction efficiency.This terminal block is used for distribution boxes, distribution cabinets, branch cabinets, ring mains, box transformers, leakage protection switches, drop switches and desktop transformers. 3. The single-way copper terminal is equipped with a silicone sheath to protect the wire without using insulating tape.

Connection performance test


Power frequency withstand voltage test:
The test voltage is 6.5kV,
The test time is 5min,

No breakdown, no flashover. 


2 Power frequency withstand voltage Test voltage: 6.5_KV;
Test time: _5__min;
No breakdown,
no flashover;
qualified

Impact withstand voltage test:
Test voltage 40kV, 10 times for positive and negative electrodes No breakdown, no flashover

3 Impact - voltage Test voltage (peak)∶40_ kV Test times ∶ positive and negative electrode _10_ test times No breakdown, no flashover; Test voltage (peak)∶
(-3960-40.63/39.67~40.72) kY
test times ∶ positive and negative electrode _10_
No breakdown, no flashover
qualified

Short-term tolerance test:
Test a 70mm2 product, load an instantaneous current of 8400A, and simulate an instantaneous short circuit.

Short-term withstand current test:
Terminal specifications: _70 __mm²
Test the largest and smallest wire that can be connected at the terminal, The test current and energizing time shall be carried out in accordance with GB/T14048.7-20067.2.3
1.Maximum connection conductor: 70x2 (mm²x m)
Test current: 8400 (A) 8.48KA
Oscillogram number:D17C-100299S1
1.Minimum connection conductor: (mm²×m) 50x2 50x2
Test current;_6000(A) 6.06KA
Oscillogram number: D17C-10299-S2
After the test, the terminal shall not appear that may affect its further use
conform

Shell protection level test:

The dustproof and waterproof level of the through terminal can reach IP57


4 Enclosure ratin(Self-locking terminals ) The protection level of the wiring self-locking terminal should reach: 57
The first characteristic digit: 5
During the test, keep the drain hole open under normal conditions for _8_h
The amount of dust entering after the test must not affect the normal operation or safe use of the equipment;
Second characteristic number: 7
The lowest point of the shell should be 1000mm below the water surface;
Test duration 30min;
The water intake of electrical appliances should have no harmful effects
Self-locking terminal protection level: 57
The first characteristic digit: 5
During the test, keep the drain hole open under normal conditions for _8_h
The amount of dust entering after the test must not affect the normal operation or safe use of the equipment;
Second characteristic number: 7
The lowest point of the shell should be 1000mm below the water surface;
Test duration 30min;
No dust, no water
qualified

Mechanical tensile test:

The national standard requires the tensile force to reach 60A (A is the cross-sectional area) The 120mm2 cable has a pulling force of 7300N, which meets the requirements.


1 Mechanical tensile test Tensile force value: 960N (60A; A is the nominal tensile force value of copper wire: cross-sectional area, unit mm²; maximum 20000N) There is no relative slippage between the wire and the terminal; Rally value: _1000_N No relative sliding between wire and terminal qualified

Temperature rise test:

The national standard requires that the temperature rise should not exceed 45K, and the connection king is only 28.1K.which is better than the international standard

Inspection items and inspection requirements Measurement or observation result 1#
Model specification: N-DK70
Temperature rise test
Terminal specifications: _70_mm
Connect the maximum and minimum wires allowed to be connected at the terminal to test, and the test current shall be selected according to GB/T14048.7-2006 Table 4,The temperature rise limit shall meet the requirements of 8.4.5 1.Connect the largest conductor: ____ (mm²× m)
Test current: 192 (A)
Tightening torque: _14_ (N·m)
Ambient temperature: +10℃-+40
Maximum temperature rise of terminal: ≤45℃
70*2
193
14
23.2℃
28.1

Single-pass connection product parameters       measurement unit:mm


Product number Adapt to wire specifications Adapt to wire diameter Stripping length Total length A Width B Outer diameter C Thickness D Aperture E Bore F Sheath insulation Flammability rating
C-DT10 10m㎡Stranded wire ≤¢1.5 17 42.5 12 ¢12.2 2.5 ¢5.2 ¢6.0 ≤10KV V0
C-DT16 16m㎡Stranded wire ≤¢2.0 20 53 15 ¢14.0 2.5 ¢8.2 ¢6.8 ≤10KV V0
C-DT25 25m㎡Stranded wire ≤¢2.5 25 64.5 19 ¢18.2 3 ¢8.2 ¢9.1 ≤10KV V0
C-DT35 35m㎡Stranded wire ≤¢2.5 28 71 20 ¢19.2 3.5 ¢10.2 ¢10.1 ≤10KV V0
C-DT50 50m㎡Stranded wire ≤¢2.0 31 77 21 ¢20.7 3.5 ¢10.2 ¢11.6 ≤10KV V0
C-DT70 70m㎡Stranded wire ≤¢2.5 33 84.4 23 ¢22.4 4.5 ¢12.2 ¢14.4 ≤10KV V0
C-DT95 95m㎡Stranded wire ≤¢2.8 40 95 25 ¢27.6 4.5 ¢12.2 ¢16.0 ≤10KV V0
C-DT120 120m㎡Stranded wire ≤¢2.5 44 104 24 ¢29.8 4.5 ¢14.2 ¢18.0 ≤10KV V0
C-DT150 150m㎡Stranded wire ≤¢2.5 44 111.5 34 ¢32.0 5.0 ¢14.2 ¢19.0 ≤10KV V0
C-DT185 185m㎡Stranded wire ≤¢2.8 48 117.5 33.4 ¢36.3 6.0 ¢17 ¢23.0 ≤10KV V0
C-DT240 240m㎡Stranded wire ≤¢2.8 53 128 36 ¢38.8 6.0 ¢18 ¢24.0 ≤10KV V0
C-DT300 300m㎡Stranded wire ≤¢3.0 80 176 43 ¢46.6 7.0 ¢20.5 ¢29.0 ≤10KV V0
C-DT400 400m㎡Stranded wire ≤¢3.0 88 194 50 ¢53.6 7.5 ¢20.5 ¢34 ≤10KV V0


แท็กยอดนิยม: C-DT16 single pass 16 square, ผู้ผลิต, ซัพพลายเออร์, โรงงาน, กำหนดเอง, จีน, ผลิตในประเทศจีน, FOB Shenzhen, ส่วนลด, ราคา, ราคา, ใบเสนอราคา, CE, ใหม่ล่าสุด, คุณภาพ, ขั้นสูง, ทนทาน, รับประกัน 5 ปี, Classy, จดสิทธิบัตรนวัตกรรม

หมวดหมู่ที่เกี่ยวข้อง

??? ?????????

โปรดส่งคำถามของคุณในแบบฟอร์มด้านล่าง เราจะตอบคุณใน 24 ชั่วโมง
验证码,看不清楚?请点击刷新验证码